2 x 5/8″ Diameter and 3-1/8″ Effective Span Length Pin
2 x Lock Head with Protective Rubber Cap
4 x Tubular Keys
10 x Rubber O-Rings
1 x Instructions
Pin Lock
A strong pin lock is made of carbon steel withstanding strain and pressure. The black electrophoretic paint on it resists corrosion. The 5/8″ diameter and 3-1/8″ span length fit 2″ and 2-1/2″ hitch receiver tubes. Vehiclex pin locks are used with Class III and IV hitches for pulling trailers with gross loads of up to 16,000 pounds.
Tubular Keys
The short tubular keys are designed with a unique key code for each Vehiclex Hitch Receiver Pin Lock. This increases the security level of the lock. Every set comes with 4 keys made of steel.
Lock Head
Rotating 360° lock head with a hexagonal shape is easy to operate—to lock it you just need to push the key slot. It’s made of strong carbon steel with a snap-on rubber cap that protects the key slot from dust, mud, and grime.
Rubber O-Rings
10 replacement rubber O-rings are squeezed to plug the gap between the hitch and pin lock to prevent rattling noise.
Unbeatable Quality, Fair Price – Our Promise to You!
At Vehiclex we believe that top quality should come at a fair price. We can offer this because we are a small US company that doesn’t spend a lot of money on marketing and large staff but works hard to improve quality and optimize production. By cutting out the middlemen, optimizing production, and negotiating good deals, we pass the savings on to you without compromising on quality. As proof of our quality, we offer a long-term guarantee, openly display the results of all our laboratory tests and you can read our customer reviews.
Item is easy to install and holds ball mount securely from wobbling and rattling.
Rated 5 out of 5
S. Tracy
Item is easy to install and holds ball mount securely from wobbling and rattling.
Rated 5 out of 5
alberto
It does what it says it does. This item is straight to the point and there is nothing complecated about it.
Rated 5 out of 5
alberto
It does what it says it does. This item is straight to the point and there is nothing complecated about it.
Rated 5 out of 5
Dave Gardner
I have a bike rack that I can usually hand tighten into my van hitch but it rattles and bounces up and down while driving as it's not a perfectly tight fit into the hitch opening.The hitch tightener was easy to use/assemble and made the excess/loose movement all but disappear.As the video shows what it was like before I had installed it and after you can see there is a major difference and this could be a great benefit with towing a trailer as well.
Rated 5 out of 5
Dave Gardner
I have a bike rack that I can usually hand tighten into my van hitch but it rattles and bounces up and down while driving as it's not a perfectly tight fit into the hitch opening.The hitch tightener was easy to use/assemble and made the excess/loose movement all but disappear.As the video shows what it was like before I had installed it and after you can see there is a major difference and this could be a great benefit with towing a trailer as well.
Rated 5 out of 5
Dave Gardner
I have a bike rack that I can usually hand tighten into my van hitch but it rattles and bounces up and down while driving as it's not a perfectly tight fit into the hitch opening.The hitch tightener was easy to use/assemble and made the excess/loose movement all but disappear.As the video shows what it was like before I had installed it and after you can see there is a major difference and this could be a great benefit with towing a trailer as well.
Rated 5 out of 5
Dave Gardner
I have a bike rack that I can usually hand tighten into my van hitch but it rattles and bounces up and down while driving as it's not a perfectly tight fit into the hitch opening.The hitch tightener was easy to use/assemble and made the excess/loose movement all but disappear.As the video shows what it was like before I had installed it and after you can see there is a major difference and this could be a great benefit with towing a trailer as well.
Rated 5 out of 5
OCD_OBD
Just enough clearance to install upside down for my hitch skid. The tightener arrived in great condition.Super easy to install. Tightened down the hitch skid step and eliminated all the play.Bonus, the rubber coating matches the red rubber on the other hardware.Overall, great quality and I wouldn't change a thing.
Rated 5 out of 5
OCD_OBD
Just enough clearance to install upside down for my hitch skid. The tightener arrived in great condition.Super easy to install. Tightened down the hitch skid step and eliminated all the play.Bonus, the rubber coating matches the red rubber on the other hardware.Overall, great quality and I wouldn't change a thing.
1-5 of 29 reviews
Stephen Mark Whorton
Reviewer
Rated 5 out of 5
Looks and works as advertised
Jerry
Reviewer
Rated 5 out of 5
?
S. Tracy
Reviewer
Rated 5 out of 5
Item is easy to install and holds ball mount securely from wobbling and rattling.
alberto
Reviewer
Rated 5 out of 5
It does what it says it does. This item is straight to the point and there is nothing complecated about it.
Jamie Fuqua
Reviewer
Rated 4 out of 5
This is a easy install and a solution to that rattling hitch. Makes for a quieter ride. Cheap solution to a annoying issue.
Looks and works as advertised
?
Item is easy to install and holds ball mount securely from wobbling and rattling.
It does what it says it does. This item is straight to the point and there is nothing complecated about it.
This is a easy install and a solution to that rattling hitch. Makes for a quieter ride. Cheap solution to a annoying issue.