Vehiclex hitch tightener is strong enough to eliminate wobble, rattle, noise, and hitch movement for cargo carriers, bike racks, hitch receivers, trailer ball mounts, etc. All components are made of carbon structural steel, which is usually used in construction and engineering welded structures, and also as mechanical fasteners. The diameter of Vehiclex steel U-bolt is 0.44″ (0.51″ with coating). And the width of the plate is 0.31″. We use more massive construction than other brands to ensure your confidence on the road. The rubber coating on the U-bolt and powder coating on the tightener plate reduce the risk of scratches and chipping, which resist corrosion in any weather. The anti-rattle stabilizer is compatible with 1 1/4″ and 2″ receivers.
Unbeatable Quality, Fair Price – Our Promise to You!
At Vehiclex we believe that top quality should come at a fair price. We can offer this because we are a small US company that doesn’t spend a lot of money on marketing and large staff but works hard to improve quality and optimize production. By cutting out the middlemen, optimizing production, and negotiating good deals, we pass the savings on to you without compromising on quality. As proof of our quality, we offer a long-term guarantee, openly display the results of all our laboratory tests and you can read our customer reviews.
Item is easy to install and holds ball mount securely from wobbling and rattling.
Rated 5 out of 5
S. Tracy
Item is easy to install and holds ball mount securely from wobbling and rattling.
Rated 5 out of 5
alberto
It does what it says it does. This item is straight to the point and there is nothing complecated about it.
Rated 5 out of 5
alberto
It does what it says it does. This item is straight to the point and there is nothing complecated about it.
Rated 5 out of 5
Dave Gardner
I have a bike rack that I can usually hand tighten into my van hitch but it rattles and bounces up and down while driving as it's not a perfectly tight fit into the hitch opening.The hitch tightener was easy to use/assemble and made the excess/loose movement all but disappear.As the video shows what it was like before I had installed it and after you can see there is a major difference and this could be a great benefit with towing a trailer as well.
Rated 5 out of 5
Dave Gardner
I have a bike rack that I can usually hand tighten into my van hitch but it rattles and bounces up and down while driving as it's not a perfectly tight fit into the hitch opening.The hitch tightener was easy to use/assemble and made the excess/loose movement all but disappear.As the video shows what it was like before I had installed it and after you can see there is a major difference and this could be a great benefit with towing a trailer as well.
Rated 5 out of 5
Dave Gardner
I have a bike rack that I can usually hand tighten into my van hitch but it rattles and bounces up and down while driving as it's not a perfectly tight fit into the hitch opening.The hitch tightener was easy to use/assemble and made the excess/loose movement all but disappear.As the video shows what it was like before I had installed it and after you can see there is a major difference and this could be a great benefit with towing a trailer as well.
Rated 5 out of 5
Dave Gardner
I have a bike rack that I can usually hand tighten into my van hitch but it rattles and bounces up and down while driving as it's not a perfectly tight fit into the hitch opening.The hitch tightener was easy to use/assemble and made the excess/loose movement all but disappear.As the video shows what it was like before I had installed it and after you can see there is a major difference and this could be a great benefit with towing a trailer as well.
Rated 5 out of 5
OCD_OBD
Just enough clearance to install upside down for my hitch skid. The tightener arrived in great condition.Super easy to install. Tightened down the hitch skid step and eliminated all the play.Bonus, the rubber coating matches the red rubber on the other hardware.Overall, great quality and I wouldn't change a thing.
Rated 5 out of 5
OCD_OBD
Just enough clearance to install upside down for my hitch skid. The tightener arrived in great condition.Super easy to install. Tightened down the hitch skid step and eliminated all the play.Bonus, the rubber coating matches the red rubber on the other hardware.Overall, great quality and I wouldn't change a thing.
1-5 of 29 reviews
Stephen Mark Whorton
Reviewer
Rated 5 out of 5
Looks and works as advertised
Jerry
Reviewer
Rated 5 out of 5
?
S. Tracy
Reviewer
Rated 5 out of 5
Item is easy to install and holds ball mount securely from wobbling and rattling.
alberto
Reviewer
Rated 5 out of 5
It does what it says it does. This item is straight to the point and there is nothing complecated about it.
Jamie Fuqua
Reviewer
Rated 4 out of 5
This is a easy install and a solution to that rattling hitch. Makes for a quieter ride. Cheap solution to a annoying issue.
Sorry, no reviews match your current selections
Additional information
Weight
1.54 lbs
Dimensions
5.08 × 3.7 × 1.81 in
29 reviews for Vehiclex Anti Rattle Hitch Tightener for 1.25″ and 2″ Hitch Receivers – 0.44″ U-Bolt Diameter – Protective Anti-Rust Coating
Rated 5 out of 5
OutdoorGuy –
Why did I wait so long to get one of these? This anti-rattle stabilizer seems very well made, of great quality, and super easy to install.Takes less than 5 minutes to install, and not that you need instructions but they are included. I usually have a bike rack with up to 3 bikes that makes a ton of noise while driving. Ask me how driving from Phoenix to the Grand Canyon and back was. (LOUD). I almost thought the rack might be falling off. I sometimes pull trailers too and am sure this stabilizer will make a huge difference. As you can see in the pics and video it makes it nearly silent now. Winning!
Rated 4 out of 5
Amazon Customer –
This anti rattle device is sufficient for most hitches but is not heavy enough when pulling a heavy boat. Works well when I haul my bike rack. No rattle.
Rated 5 out of 5
OCD_OBD –
Just enough clearance to install upside down for my hitch skid. The tightener arrived in great condition.Super easy to install. Tightened down the hitch skid step and eliminated all the play.Bonus, the rubber coating matches the red rubber on the other hardware.Overall, great quality and I wouldn’t change a thing.
Rated 5 out of 5
Dave Gardner –
I have a bike rack that I can usually hand tighten into my van hitch but it rattles and bounces up and down while driving as it’s not a perfectly tight fit into the hitch opening.The hitch tightener was easy to use/assemble and made the excess/loose movement all but disappear.As the video shows what it was like before I had installed it and after you can see there is a major difference and this could be a great benefit with towing a trailer as well.
Rated 5 out of 5
Rjwood22 –
Had a little rattle problem with my trailer hitch. I purchased this to quiet the noise. I have used it for some short jaunts and there is no rattle. I have not used it for longer trips, yet. I have read that they tend to come loose. I will let you know if there is any problem.
Rated 5 out of 5
Lette –
Fits 2015 Toyota Highlander and also used on 2016 Winnebago Vista 31BE
Rated 5 out of 5
pk –
Wonderful it stopped hitch Noice in are jeep
Rated 4 out of 5
Joe –
I like that this keeps my hitch and ball mount from wobbling around and making noise. It is worth noting that it will loosen up some with a trailer on. Definitely make sure you check it after hooking up a trailer, and when you stop. It does not help that my configuration has more slop in it than I would like to see, and I may get a sleeve, too, but something to keep in mind.
Rated 5 out of 5
ScottSlaf –
Fit my 2” receiver perfectly, very high quality hardware, nice looking. The red rubberizing is showing some stress after a short period of time, this shouldn’t affect the operation but might not look so great. Overall nice product!
Rated 5 out of 5
SeriousBob –
Durable and easy to install. Does a good job quieting my receiver hitch rattle. Nice look.
Rated 5 out of 5
bryan j baird –
It really stops the side to side rattle on hitches
Rated 1 out of 5
Kindle Customer –
Would be nice if it fit. My hitch has a short extension, so the device would not fit. Sent it back. May work for longer hitches (or whatever you call the thing that go in the receiver),
Rated 5 out of 5
Mk –
This hitch clamp is AWESOME 1000000⭐️⭐️⭐️⭐️⭐️⭐️
Rated 5 out of 5
bobby morehead –
Works to stop that annoying hitch rattling.
Rated 5 out of 5
Arv –
great item
Rated 5 out of 5
Biebs –
Product worked as stated.
Rated 5 out of 5
scot oglesby –
Great product arrived exactly as advertised works well
Rated 5 out of 5
Eric –
Works great. I’d tighten it again after the first use. But definitely worth every penny.
Rated 5 out of 5
Amazon Customer –
This product worked good, stopped the noises in the hitch immediately. Would definitely buy again!!
Rated 5 out of 5
david –
Works as described no more rattles
Rated 5 out of 5
Jens –
Every hitch needs this. A hitch stabilizer can be tightened up enough that it prevents a hitch from moving at all. In my experience, it is especially useful for hitch-mount bike carriers. It will hold the carrier more solidly and prevent it from rocking back and forth, particularly when loaded with the weight of two or three bikes. I suspect this hitch stabilizer could pay for itself many times over.
Rated 5 out of 5
LMW –
The Vehiclex Anti Rattle Hitch Tightener for 1.25″ and 2″ Hitch Receivers makes us feel much more secure about our new twenty-foot trailer. We weren’t as worried about it rattling as making sure it was securely attached to the truck. We use the trailer for our tractor so it is carrying a lot of weight.The hitch tightener was easily attached. It works perfectly, holding the trailer tightly to the hitch. The rubber coating protects the hitch from scratches while the powder coating protects the strength of the plate. We are very pleased with it and highly recommend this hitch tightener!
Rated 5 out of 5
D. Paterson –
This Vehiclex Anti Rattle Hitch Tightener is a must have, especially if you have a bike rack attached to the receiver on your vehicle. No more rattling noise when you go over bumps or round corners. IMHO it strengthens the Hitch/Receiver connection the way it securely clamps the Hitch to the Receiver and you no longer have to helplessly watch your Bike Rack loaded with Bikes rocking back and forth as you drive down the freeway. An inexpensive additional layer of security.
Rated 5 out of 5
Oliver –
This was easy to install.Works just like it is supposed to.Our hitch has no more annoying rattles or wobbling.Great investment at a reasonable price.
Rated 4 out of 5
Jamie Fuqua –
This is a easy install and a solution to that rattling hitch. Makes for a quieter ride. Cheap solution to a annoying issue.
Rated 5 out of 5
alberto –
It does what it says it does. This item is straight to the point and there is nothing complecated about it.
Rated 5 out of 5
S. Tracy –
Item is easy to install and holds ball mount securely from wobbling and rattling.
Rated 5 out of 5
Jerry –
?
Rated 5 out of 5
Stephen Mark Whorton –
Looks and works as advertised
Only logged in customers who have purchased this product may leave a review.
Looks and works as advertised
?
Item is easy to install and holds ball mount securely from wobbling and rattling.
It does what it says it does. This item is straight to the point and there is nothing complecated about it.
This is a easy install and a solution to that rattling hitch. Makes for a quieter ride. Cheap solution to a annoying issue.